Loading... Please wait...

Our Newsletter


Dust Collection Systems

New OSHA Regulations for controlling silica exposures in construction (Standard 1926.1153) will start being enforced September 23, 2017.

The regulations apply to all occupational exposures of respirable crystalline silica in construction work.  Exposures to respirable crystalline silica occur when tools such as chipping hammers, rivet buster, paving breakers )Jackhammers), rock drills, dowel drilling rigs, concrete saws (both handheld and walk behind), handheld grinders and hydraulic boom mounted breakers that are used on concrete, brick, stone )granite and quartz), mortar and other materials that contain crystalline silica.

The Texas Pneumatic Dust Collection Systems (both wet and dry) are designed to comply with the standard.  Our TX-DCS3 will work on all chipping hammers, rivet busters, rock drills and hand held paving breakers.  It will also work for hand held saws and grinders.

The TXCS3-F is a dry system that will contain the dust (crystalline silica) at the source and force it though the portable filter.  Based on the OSHA Guidelines. filters are required to have an efficiency above 99% of particles down to 0.3 microns in size.

The portability of the unit allows it to be placed right where the chisels or drill bits are being used.  The dust and small debris will be pulled away and forced through the filter which can be located anywhere within a 30 foot radius from the source.  By locating the filter away from the work area, there is a lower probability of exposure to airborne crystalline silica particles.


New Products